1. General
1.1 How to use this manual
This manual covers technical data and properties of the signal converter
SK20.2
Follow the instructions in this manual for safe and proper operation of the
product.
Keep this manual throughout the SK20’s lifespan.
1.2 Intended use
The signal converter SK20.2 converts SSI signals into analog output
signals. It is intended for use in the industrial sector. Before use, a risk
assessment must be carried out in respect to the specific application. Since
the SK20.2 is used as part of an overall concept, personal safety must be
ensured by the overall system. Safety measures must be taken according to
the risk assessment.
1.3 Sings and symbols
This sign indicates a risk of injury if the instructions are not strictly
observed
This sign indicates a risk of damage to the product or other pieces of
equipment, if the instructions are not strictly observed.
This sign indicates tips and useful information for easier handling of the
product
8026616/2021-03-11 • Subject to change without notice • SICK AG • Waldkirch • Germany • www.sick.com
To Next Page
Loading...
