ON SAFETY 2
8015078/145N/2019-05 -24 | SICK STEGMANN OPERATING INSTRUCTIONS | AFS60/AFM60 PROFINET
9
Subject to change without notice
2.3 General safety notes and protective measures
WARNING
Please observe the following procedures in order to ensure the correct and safe use
of the AFS60/AFM60 PROFINET!
The encoder is to be installed and maintained by trained and qualified personnel with
knowledge of electronics, precision mechanics and control system programming. It is
necessary to comply with the related standards covering the technical safety
stipulations.
The safety regulations are to be met by all persons who are tasked with the installation,
the operation or the maintenance of the device:
The technical information must always be available and must always be followed.
Unqualified personnel are not allowed to be present in the vicinity of the system
during installation.
The system is to be installed in accordance with the applicable safety stipulations
and the mounting instructions.
All work safety regulations of the applicable countries are to be followed during
installation.
Failure to follow all applicable health and safety regulations may result in injury or
damage to the system.
The current and voltage sources in the encoder are designed in accordance with
all applicable technical regulations.
To Next Page
Loading...
Need help?
General
