PROGRAMMING TOOL | SICK8016223/19SR/2020-11-02
Subject to change without notice
17
PGTPGT-08-S@SOPA S
4.5 Programming absolute encoders
Note:
Only encoders with the type codes listed in chapter 5.1 can be programmed (see
page 25).
b Open the PROGRAMMING and POSITION INSTRUMENT views in the working area.
Programmable values and output values are shown in the two views according to the
encoder type used.
Note:
A brief explanation of the color values for the individual bits can be found in the SOPAS
context help.
To Next Page
Loading...
