13
8018429/1DWP/V3-0/2022-06| SICK A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | GMS840
Subject to change without notice
PRODUCT DESCRIPTION 2
2.3.2 Opening the enclosure
Enclosure with hinges (opening to the top):
1 Loosen the lock.
2 Lift the cover on both sides with the whole palm of your hand and fold away upwards.
Fig. 2: Opening to the top
Enclosure without hinges (opening to the bottom)
1 Loosen 4 M5 screws (the screws are connected to the enclosure to prevent the risk of
loss).
2 Hold the cover on both sides and pull forwards.
3 Hinge the cover in underneath in the enclosure tabs (the cover has appropriate
recesses).
Fig. 3: Opening to the bottom
Hinges on enclosure cover
● If the cover is attached with hinges, it can be swiveled up.
● The hinges can be removed.
● Without hinges, the cover can only be removed downwards and then hung in.
NOTICE:
Do not crimp the LAN cable and/or grounding cable.
▸ Lay the cable into the provided guide.
To Next Page
Loading...