SICK GMS840 - Electrical Connections; Opening the Enclosure

17
8018429/1DWP/V3-0/2022-06| SICK A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | GMS840
Subject to change without notice
INSTALLATION 3
3.6 Electrical connections
3.6.1 Opening the enclosure
▸ Open the enclosure, see “Opening the enclosure cover”, page 11.
Fig. 4: Electrical connections
To connect the electric lines:
▸ Press on the power connection terminal with a screwdriver and insert the line.
WARNING: Observe the safety information
Observe the safety information in Chapter “Opening the enclosure cover”, page 11.
 Power connection terminals
 I/O module (signal connections)
The cable inlets are suitable for cables with outer diameter 7 ...12 mm