27
8018429/1DWP/V3-0/2022-06| SICK A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | GMS840
Subject to change without notice
TECHNICAL DATA 8
8Technical data
8.1 Dimensions, fitting position and connections
8.1.1 Dimensions
Only install the enclosure horizontally (cover opens downwards).
Fig. 8: Hinged cover
NOTE: Observe clearance
● For lines: Leave a clearance of approx. 200 mm under the cover.
● For the cover placement area: Leave a downward clearance of approx. 600 mm from
the bottom edge of the enclosure and approx. 100 mm to the rear.
To Next Page
Loading...