SICK GMS840 - Installation Guide; Safety During Transport and Mounting

14
8018429/1DWP/V3-0/2022-06| SICKADDENDUM TO OPERATING INSTRUCTIONS | GMS840
Subject to change without notice
3 INSTALLATION
3 Installation
3.1 Safety during transport and mounting
3.1.1 For GMS841 (ATEX/ IECEx) and GMS842 (
C
CSA
US)
3.2 Scope of delivery
Please see the delivery documents for the scope of delivery.
CAUTION: Risk of injury
▸ Consider the weight of the enclosure before lifting, see “Enclosure specifications”,
page 30.
▸ Call in further personnel as assistants as required.
CAUTION: Risk of injury
There is a risk of injuries should the enclosure drop down due to the weight of the device
and through hard, protruding enclosure parts.
During transport and mounting:
▸ Wear safety shoes. Wear non-slip gloves.
▸ Handle the device carefully and safely. Secure during transport. Avoid falls and
collisions.
▸ Call in further personnel as assistants as required.
NOTE: Risk of damage
▸ Do not use gas connections and cable inlets as lifting points.
WARNING: Risk of explosion through sparks
▸ Do not carry out work on the device in potentially explosive atmospheres.
▸ Do not unpack the device in potentially explosive atmospheres.
▸ Only use an adequate packaging for transportation of the device.
▸ Only use tools approved for Ex zones.