SICK LMS511-12100 Heavy Duty Outdoor - Page 103

Operating Instructions
LMS5xx
Technical specifications
8013796/ZM63/2017-05-09 © SICK AG · Germany · All rights reserved · Subject to change without notice 103
Chapter 10
System connector
Material GDALSI12 3.2582.05
Color RAL 9005 (black)
Cable entries (LMS511/LMS531/LMS581)
Material Stainless steel/plastic
Dimensions
5)
Height 185 mm
Width 155 mm
Depth 160 mm
Total weight (without connection cables) 3.7 kg
Electrical data
SELV Supply voltage LMS5xx at the sensor accord. to
IEC 60364-4-41
19.2 V 24 V 28.8 V
Permissible residual ripple ±5%
SELV Supply voltage for the LMS511/LMS531/
LMS581 heating accord. to IEC 60364-4-41
19.2 V 24 V 28.8 V
Switch on current 2 A
6)
Operating current at DC 24 V 0.9 A
Operating current with max. output load at DC 24 V 1.9 A
Operating current with maximum heating performance
at DC 24 V
3.2 A 3.8 A
Power consumption without output load at DC 24 V 22 W 25 W
Power consumption with maximum output load at
DC 24 V
46 W 50 W
LMS511/LMS531/LMS581: additional power
consumption of heating at DC 24 V
55 W 65 W
Electrical connection LMS511/LMS531/LMS581 4 x round M12 plug-in connectors
1x round M8 plug-in connector
Electrical connection LMS500 1 x System connector with 2 x screw
terminal blocks
1x round M8 plug-in connector
Technical specifications, screw terminals
Cross-section of rigid cores
(American Wire Gauge — AWG)
0.14 mm²
(approx.
26 AWG)
1.5 mm²
(approx.
16 AWG)
Cross-section of flexible cores
(American Wire Gauge — AWG)
0.14 mm²
(approx.
26 AWG)
1.0 mm²
(approx.
18 AWG)
Insulation stripping length for the cores 5 mm
Screw tightening torque 0.22 Nm 0.3 Nm
Cable length for device power supply at DC 24 V
With 1 mm² wire cross-section (approx. 18 AWG) 220 m
With 0.5 mm² wire cross-section
(approx. 22 AWG)
110 m
With 0.25 mm² wire cross-section
(approx. 24 AWG)
50 m
Minimum Typical Maximum
Tab. 43: Data sheet LMS5xx (cont.)