What to do if the Ð light flashes at 4 Hz on my SICK Accessories?
If the indicator light flashes at 4 Hz, it indicates a system error. You should check the 7-segment display for an error message or use SOPAS ET for diagnostics. Try switching the SICK Accessories device off and then on again to resolve the issue.
Why is the Ð light illuminated on my SICK Accessories?
If the indicator light is constantly illuminated on your SICK Accessories, this is often due to a contaminated optics cover while the device is still in operation. To fix this, clean the optics cover.
What to do if Ð flashes with 1 Hz on SICK Accessories?
If the indicator light flashes at 1 Hz, it means that the optics cover is contaminated and the SICK Accessories is not working. You should clean the optics cover.
General| Field of View | 190° |
|---|---|
| Protection Rating | IP67 |
| Scanning Angle | 270° |
| Measurement Accuracy | ± 30 mm |
| Operating Voltage | 24 V DC |
| Protection Class | III |
| Interface | Ethernet, RS-422 |
| Type | Laser Scanner |
| Output Signal | Ethernet |
| Operating Temperature | -10 °C ... +50 °C |
| Angular Resolution | 0.5° |
| Scanning Frequency | 25 Hz |
Defines the intended applications and proper usage of the LMS1xx sensor.
Details prohibited uses and limitations of the LMS1xx.
Warns about dangers and warranty voidance from modifications to the device.
Specifies the necessary training and qualifications for safe operation.
Covers essential safety notes, warnings, and general operational safety.
Explains how the electro-optical laser measurement sensor functions.
Describes the available Ethernet, CAN, Serial host, and auxiliary interfaces.
Detailed instructions for various mounting methods and considerations.
Details the electrical connections for different LMS1xx variants.
Guides on connecting interfaces, wiring system connectors, and M12 connectors.
Details the SOPAS ET software, its functions, and system requirements.
Instructions for establishing communication via Ethernet or RS-232.
Explains the process of adapting the LMS1xx to the local situation using SOPAS ET.
Guides on verifying measurements and saving the final configuration.
Guidance on how to react when encountering malfunctions.
Explains the meaning of LED indicators for error detection.
Details the information provided by the 7-segment display for diagnostics.
Methods for detailed analysis of errors and malfunctions.
Comprehensive technical data and parameters for LMS1xx/LMC1xx sensors.
To Next Page