Operating Instructions
LMS1xx Laser Measurement Sensors
About this document
8012471/ZN27/2017-06-09 © SICK AG · Germany · All rights reserved · Subject to change without notice 7
Chapter 1
1.3 Depth of information
These operating instructions contain the following information on the LMS1xx:
Product description
Transport and storage
Mounting
Electrical installation
Commissioning and configuration
Maintenance
Troubleshooting
Technical data
In addition, an online help is available in the SOPAS ET configuration software supplied; this
help provides information on the usage of the software user interface, as well as on the
configuration of the LMS1xx.
LMS12x/LMS13x/LMS14x Security and LMC12x/LMC13x VdS (object protection)
You will find further information on theses devices, in particular on installation and
mounting, electrical installation, commissioning and configuration, in the document
”Technical Information (installer instructions VdS)”, part no.: 8013749, issue in English.
You will find a detailed description of the different telegrams for theLMS1xx/LMC1xx in the
document “Telegram Listing Laser Measurement Sensor”, part no.: 8014631, issue in
English.
You will find further information on the LMS1xx/LMC1xx, its accessories as well as
documents on the online product page.
Please see section 1.5 “Further information” on page 9.
To Next Page
Loading...
