What to do if a critical error occurred on SICK Accessories node?
If a critical error occurs on the SICK Accessories node, try switching the power off and then on again. This action may clear the error under certain circumstances.
How to clear emergency shutdown on SICK Accessories?
If the emergency shutdown error appears on your SICK Accessories, it can only be cleared by turning the power off and then back on.
Why configuration error on SICK Accessories?
A configuration error on your SICK Accessories indicates that too many or too few nodes are connected to the safe sensor cascade.
General| Brand | SICK |
|---|---|
| Model | Flexi Loop |
| Category | Accessories |
| Language | English |
Provides essential safety information and warnings regarding the safe sensor cascade.
Defines the intended use of the Flexi Loop safe sensor cascade and foreseeable misuse.
Specifies the necessary expertise and qualifications for personnel involved in the safe sensor cascade's installation and maintenance.
Specifies limits for total current within the safe sensor cascade and sections.
Analyzes voltage drop effects and provides solutions to maintain adequate voltage levels.
Provides safety instructions for powering OSSD devices connected to the Flexi Loop node.
Provides detailed instructions and pin assignments for connecting the Flexi Loop to Flexi Soft and Flexi Classic controllers.
Emphasizes the importance of testing the protective device after any configuration changes.
Explains how to teach in node numbers and disable tamper protection using the MSTR Flexi Loop accessory.
Details how to configure the safe sensor cascade using IO-Link with a standard controller.
Offers guidance on ceasing operation and safety precautions when encountering unclear faults.
Details the meaning of LEDs on various Flexi Loop components for status indication and error diagnosis.
To Next Page