What to do if SICK LMS511-22100 Heavy Duty Outdoor Accessories shows a system error?
If your SICK Accessories is showing a system error, pay attention to the error display of the 7-segment display or carry out a diagnostics with the aid of SOPAS ET. You can also try switching the device off and back on again.
How to fix no or low operating voltage in SICK LMS511-22100 Heavy Duty Outdoor Accessories?
To address a situation where your SICK Accessories has no operating voltage, or the voltage is too low, check the voltage supply and activate it if necessary.
General| Brand | SICK |
|---|---|
| Model | LMS511-22100 Heavy Duty Outdoor |
| Category | Accessories |
| Language | English |
Describes the intended use of the LMS5xx as a non-contact optical distance measurement sensor.
Lists prohibited uses and states the LMS5xx is not a safety component.
Warns against modifications and conversions that may cause danger and void warranty.
Defines qualifications for personnel performing tasks with the LMS5xx.
Lists general safety notes and protective measures for correct and safe use of the LMS5xx.
Discusses laser radiation hazards and operational safety precautions.
States that repairs are only allowed by authorized personnel and customer modifications void warranty.
Lists special features of LMS5xx variants, including field of view, scanning frequency, inputs/outputs, and data interfaces.
Compares LMS5xx Lite, PRO, and Heavy Duty versions based on function, resolution, and temperature.
Explains how the LMS5xx performs distance and direction measurements using laser pulses.
Details scanning range based on target remission and environmental factors.
Explains how beam diameter and point spacing increase with distance and angular resolution.
Covers basic parameters for object measurement, including scanning frequency and angular resolution.
Details configurations for LMS5xx Lite and PRO versions regarding scanning frequency and angular resolution.
Describes how measured values are supplied to interfaces via SOPAS ET or telegrams.
Describes the integrated field application for collision protection, surveillance, and access monitoring.
Explains how evaluation cases define output fields, strategies, and actions for LMS5xx.
Describes digital switching inputs/outputs and encoder inputs for LMS5xx.
Explains synchronizing multiple LMS5xx units to avoid interference and increase scanning frequency.
Outlines general and specific mounting requirements for the LMS5xx.
Provides guidance on selecting an appropriate mounting location, avoiding direct sunlight and mirrors.
Details steps for mounting the LMS5xx, including torque specifications and screw checks.
Advises on correct placement and mounting of multiple LMS5xx units to avoid interference.
Details conditions for safe operation, focusing on grounding and equipotential bonding.
Describes the different connections available on LMS5xx variants (USB, Ethernet, Indoor/Outdoor variants).
Covers performing electrical installation, including USB and Ethernet connections.
Outlines steps for commissioning: installing SOPAS ET, establishing communication, creating parameter sets, and testing.
Explains how to establish communication between a PC and the LMS5xx via Ethernet TCP/IP.
Covers adapting the LMS5xx to the local situation using SOPAS ET and parameter sets.
Details verifying measured values and the measurement area using SOPAS ET's scan view.
Covers procedures for removing and replacing an LMS5xx with a new or repaired unit.
Details replacing LMS500/LMS511 with parameter cloning via system connector.
Explains complete replacement without using the former system connector, requiring manual configuration.
Describes the parameter cloning function for transferring settings between devices.
Advises to cease operation if a malfunction cause is unclear and to stop the system if errors are not identifiable.
Explains error indications from LEDs and their possible causes and rectifications.
Lists indications on the 7-segment display for errors, their causes, and rectification measures.
Advises contacting SICK Support for unresolvable errors and provides information for faster processing.
Provides detailed technical specifications for the LMS5xx sensor, including performance and measurement accuracy.
To Next Page