Technical Information Chapter 3
RFU63x
Mounting
8014335/YUO7/2016-04-04 © SICK AG · Germany · All rights reserved · Subject to change without notice 11
3.2.2 Installing VESA adapter plate (no. 2061688) on the RFU630
Procedure for attachment on the RFU630:
1. Install the adapter plate on the rear side of the RFU630 using the four supplied
M6 x 16 mm screws.
2. Affix the RFU630 and adapter plate to the VESA bracket using four M4 screws, or to a
standard industrial bracket with a 57 mm x 57 mm grid using four M6 screws.
The screw length depends on the wall thickness of the front end of the VESA bracket.
Take care to ensure that the screwed in screws do not damage the housing of the
RFU630.
110
100
57
(40)
100
57
(40)
110
Presentation without screws
A - A
A
A
M6M4
6
M6
10.6
4 x Hexagon socket
kant 4 mm width across flat
Threaded mounting
hole M4 (4 x)
Threaded mounting
hole M6 (4 x)
All dimensions in mm
Threaded mounting hole
M6, 12 mm deep
Threaded mounting hole M6
for link clamp no. 2068919
(mounting grid 57 mm x 57 mm)
VESA adapter plate for Interrogators RFU63x
and RFU62x as well as for RFA630-x0x antenna
RFU630-131xx
M6 x 16, Hexagon socket
4 mm width across flat
To Next Page
Loading...
