NOTE
Fixed modules/submodules cannot be changed by the user. Plugged modules/submod‐
ules are configured per default but can be removed by the user.
There is no default assignment of subslots 2-5 in the IO-Link Master module or in sub‐
slot 2 of the global functions module; they need to be configured during installation
process.
7.1.1.3 Device Name and PROFINET address
The communication parameters of the IO-Link Master are displayed by double-clicking
on SIG200 in the “Device overview” window.
7 SIG200 CONFIGURATION
14
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8017853/2019-06-06 | SICK
Subject to change without notice
To Next Page
Loading...
