Slot Subslot Name Function
0 SIG200-0A0412200 Device Access Point (DAP): Main module
X1 PN-IO PROFINET functions
X1 P1 Port 1 – M12 Ethernet port functions
X1 P2 Port 2 – M12
1 1 Configuration Module Global configuration for SIG200
2 SIG200 Logic Editor Logic Editor: User-defined data processing
2 1 SIG200 IO-Link Mas‐
ter
IO-Link Master functions concerning all ports (e. g.:
state of pin 2).
2…5 Various IO-Link Device data representation used for config‐
uring IO-Link Device; must not be placed for ports
owned by REST or Logic Editor
7.1.2.1.1 Process data overview (cyclic data)
SIG200 uses Input Process Data (data from IO-Link Master to PLC) and Output Process
Data (data from PLC to IO-Link Master).
Process data is available from the following slots/subslots:
Slot Subslot Name Function
1 2 Various Logic Editor data representation
7 SIG200 CONFIGURATION
20
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8017853/2019-06-06 | SICK
Subject to change without notice
To Next Page
Loading...
