Device Info
Provides a device overview of any attached IO-Link device. This section will display the
details of any attached IO-Link sensor regardless of port configuration.
Parameter Data
Use this section to issue individual IO-Link commands to the attached device.
Data Storage
Use the commands in this section for advanced management of an IO-Link devices
data storage.
Upload:
If the IO-Link device is configured as Backup/Restore this button will upload the devices
configuration into the SIG200’s local data storage container. If the IO-Link device is
configured as Restore this button will delete the contents of the ports data storage con‐
tainer and re-initialize the port.
NOTE
Be aware that the current configuration is deleted and replaced with the new configura‐
tion from the IO-Link device.
Download / Import / Export:
Use the export and import to copy the contents of a ports data storage container from
one SIG200 into a second SIG200. After the data storage contents has been imported
into the second SIG200 it can be downloaded to the attached IO-Link device.
SIG200 CONFIGURATION 7
8017853/2019-06-06 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
51
Subject to change without notice
To Next Page
Loading...
