Figure 31: Delete connections
To remove a connection click on your desired connection and put it in into the garbage
bin on the upper area via drag & drop.
Download new Logic to the Device
Figure 32: Transfer and execute flow
Press Tansfer and Execute Flow to synchronize your workflow with your device. All changes
you made without pressing this button will be lost and are not downloaded to your
SIG200 device.
8.3.1 Deleting the Logic from the Device
Press CLEAR FLOW to delete the complete logic from the configuration window. Note
that you need to press TRANSFER AND EXECUTE FLOW to also delete the logic from the
actual device.
8 DEVICE FUNCTIONS
82
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8017853/2019-06-06 | SICK
Subject to change without notice
To Next Page
Loading...
