•
Click on Settings (=gear) to configure parameters and values of the logic
block or input/output variable.
•
Please note that only integer values are allowed (0-65535).
NOTE
Not all logic blocks are adjustable.
Figure 30: Configuration of digital inputs
•
A configuration of your digital inputs is also possible.
•
For configuration click on the selected port first and on the gear second to set
Logic and DebounceValue.
•
Use your mouse to get more information about Logic or DebounceValue.
DEVICE FUNCTIONS
8
8017853/2019-06-06 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
81
Subject to change without notice
To Next Page
Loading...
