SICK SIG200 - Page 87

Description Subtraction of the two input values.
Number of inputs 2
Input data type Integer
Input description num1: first input value
num2: second input value
Number of outputs 1
Output data type Output 1 ("-"): Identical to input data type
Output description result: Result after subtraction of the two input
values
Settings No settings available
Description Compares the two analog input values: It is
set when input 1 less than input 2. Ieq is set
when input 1 less than or equal input 2. Eq us
set when input 1 equal input 2. Geq is set
when input 1 greater than or equal input 2. Gt
is set when input 1 greater than input 2.
Number of inputs 2
Input data type Integer
Input description num1: first input value
num2: second input value
Number of outputs 1 ... 5
Output data type Output 1 ("<"): 1-bit
Output 2 ("≤"): 1-bit
Output 3 (":"): 1-bit
Output 4 ("≥"): 1-bit
Output 5 (">"): 1-bit
Output description lt: < input is less than input 2
leq: ≤ input 1 is less or equal to input 2
eq: = input 1 is equal to input 2
geq: ≥ input 1 is greater or equal to input 2
gt: > input 1 is greater than input 2
Settings No settings available
Description Selection between two analog input values
depending on the boolean input.
Number of inputs 3
Input data type Integer & Boolean
Input 1 ("If"): 1-bit
Input 2 ("Then"): Any
Input 3 ("Else"): Any
Input description num1: Boolean input
num2: Analog input 1
num3: Analog input 2
Number of outputs 1
Output data type Integer
Output description result: If num1 is 1, then num2 is forwarded to
the result. If num1 is 0, then num3 is for‐
warded to the result (false means 0).
Settings No settings available
DEVICE FUNCTIONS 8
8017853/2019-06-06 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
87
Subject to change without notice