When expanding the Ethernet interfaces with one or more switches, it is essential to
use only jumbo-frame compatible Ethernet switches. Switches limited to just 100 Mb/s
do not support the data packet mode used by cameras and can cause transmission
errors.
Changing the IP addresses
The individual IP addresses can be changed using the SICK “SOPAS-ET” PC tool.
PRODUCT DESCRIPTION 3
8023297//2021-06-22 | SICK O P E R A T I N G I N S T R U C T I O N S | SIM2000
13
Subject to change without notice
To Next Page
Loading...
