3.4 General safety instructions and protective measures
DANGER
P
ay attention to the safety notes and protective measures!
Please observe the following items in order to ensure the correct use of the UE10-3OS
expansion module.
•
During the mounting, installation and usage of the expansion module, observe the
standards and directives applicable in your country.
•
The national/international rules and regulations apply to the installation, commis‐
sioning, use and periodic technical inspection of the expansion module, in particu‐
lar:
– Machinery Directive
– Work Equipment Directive
– EMC directive
– the accident prevention regulations and safety regulations
•
Manufacturers and operators of the machine on which a expansion module is
used are responsible for obtaining and observing all applicable safety regulations
and rules.
•
The tests must be carried out by qualified safety personnel or specially qualified
and authorised personnel and must be recorded and documented to ensure that
the tests can be reproduced and retraced at any time by third parties.
•
The operating instructions must be made available to the operator of the machine
where the UE10-3OS is used.
•
The machine operator is to be instructed in the use of the device by qualified
safety personnel and must be instructed to read the operating instructions.
3.5 Environmental protection
Disposal of unusable or irreparable devices must always occur in accordance with the
applic
able country-specific waste-disposal regulations (e.g. European Waste Code
16 02 14).
3 ON S
AFETY
6
O P E R A T I N G I N S T R U C T I O N S | UE10-3OS 8022191/2017-11-24 | SICK
Subject to change without notice