SICK WTB26 - Safety Information; General Safety Notes; Notes on UL Approval; Intended Use

1 Safety information
1.1 General safety notes
■
Read the operating instructions before commissioning.
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
2006/42/EC
NO
SAFETY
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
the sensor.
1.2 Notes on UL approval
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
2 Intended use
The WTB26 is an opto-electronic photoelectric proximity sensor (referred to as “sensor”
in the following) for the optical, non-contact detection of objects, animals, and persons.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
3 Operating and status indicators
Photoelectric proximity sensor with background suppression.
WTB26x-
-xxxxxx1x
-xxxxxx2x
-xxxxxx3x
-xxxxxxx0
2
3
4
1
2
1
4
3
SAFETY INFORMATION 1
8020354.14CS | SICK
Subject to change without notice
5