Sicor MR12 User Manual

AC MUM0040 rev. 11 - 12 -
MR12 - MR12C
WARNING
During handling, remember the following points:
- proceed slowly
- do not li the crate more than 30 cm o the ground unless obsta-
cles are present.
- lay the crate on the ground slowly
When unpacking the crate, start from the top and use suitable
tools to open it. Then, if the packaging is a crate, remove the
side walls by removing the nails at the boom from the pallet.
When the machine has been unpacked, DO NOT DISPOSE OF
THE PACKAGING IN THE ENVIRONMENT, but reuse it or send it
to a recycling company.
Once the walls of the crate have been removed, check that the
supply corresponds with the shipping document and the order.
If it does not correspond with the order, immediately nofy SICOR
or its agent. If necessary, proceed as described in paragraph 4 “Ge-
neral delivery notes”.
Aer slinging the winch, remove the screws that aach it to the pallet before liing it.

Sicor MR12 Specifications

General

Brand	Sicor
Model	MR12
Category	Other
Language	English