AC MUM0040 rev. 11 - 13 -
MR12 - MR12C
When moving the unpacked winch, use a crane or an adequately
sized forkli with wide forks and a suspension-type liing system
connected to the eyebolts on the reducon unit and a non-metallic
strap wrapped around the motor.
WARNING
Make sure that nobody is within the operang range of the means of transport with the winch (danger
zone).
If the winch is stored for long periods, leave it on its pallet
and make sure it is adequately protected (at least with a
waterproof covering) to prevent oxidaon of the internal or
external parts of the machine.
Remember that oxidaon of the shas or other mechanical parts
reduces their fague strength.
Max 260 Kg
During the liing and transport of the winch, make sure that it does not
lt from the horizontal by more than a=25° if lted forward and b=25° if
lted towards the motor part because the oil in the winch may leak out.
If the winch must be transported at an angle, for more of these angles
order the winch specifying the supply with the
“oil separate”.
b°
a°
To Next Page
Loading...
General