AC MUM0114 rev. 04 - 11 -
SH130
8. MOVING THE WINCH
WARNING
RISK OF CRUSHING,
IMPACT AND ABRASION
Personnel responsible for handling the winch must read
the safety requirements in paragraph 6 of this manual and must
wear work gloves and safety shoes.
The winch is shipped by SICOR in crates or on a pallet wrapped in nylon lm.
WARNING
Never move the crates by dragging them. Always li them. Before
removing the machine from its packing, place it as near as possible
to its nal posion.
To move the crate, use a crane with ropes or an adequately sized
forkli with long forks (see Chap. 7 "Technical features").
The forks must also be posioned as widely as possible to
avoid pping over.
If the machine has been shipped on a pallet, use an adequately sized load spreader when
moving with a crane so that the liing cables or chains are kept in a vercal posion and do not
damage parts of the machine.
To Next Page
Loading...
Need help?
General
