Sicor SH130 User Manual

AC MUM0114 rev. 04 - 17 -
SH130
9.3. VENT PLUG POSITIONING (CODE:TAP0025)
The SH130 winch has a vent plug located on the reducon unit casing.
The vent plug acts as a safety valve. The pressure caused by the movement of the rotang elements
within the gearbox is released via the labyrinth without allowing oil to spray out.
The winch can be shipped in a le or right horizontal conguraon and the vent plug is
posioned as shown in the gure.
In the event of vercal posioning, there is no need to reposion the vent plug.
① vent
1

Sicor SH130 Specifications

General

Brand	Sicor
Model	SH130
Category	Winches
Language	English