Sicor SH130 - Disposal at End of Service Life

AC MUM0114 rev. 04 - 23 -
SH130
IMPORTANT
When installing the li, do not operate the winch for long periods at low speed.
When the winch operates for long periods at low speed, the machine supports are not
lubricated properly and may seize up unexpectedly.
To ensure proper lubricaon, always start the winch at normal operang speed each me work is begun
and then run at high speed every half hour.
START-UP/SHUT-DOWN
The customer is responsible for the procedures, instrucons and wiring diagrams for the start-up and
shut-down of the winch.
NEVER USE THE WINCH FOR PERFORMANCES ABOVE THOSE INDICATED IN THE TECHNICAL
CATALOGUE.
14. DISPOSAL OF THE WINCH AT THE END OF ITS SERVICE LIFE
Drain the machine of its lubricang oil and then:
- Deliver the oil to a company that is authorised to dispose of it.
- Deliver the winch to a company authorised to recycle ferrous materials.