Sicor SH130 - Winch Transport and Storage

AC MUM0114 rev. 04 - 13 -
SH130
When moving the unpacked winch, use a crane or an adequately
sized forkli with wide forks and a suspension-type liing system
connected to the eyebolts on the reducon unit and a non-metallic
strap wrapped around the motor.
WARNING
Make sure there are no people exposed within the operang range of transport means with the winch
(danger zone).
If the winch is stored for long periods, leave it on its pallet
and make sure it is adequately protected (at least with a
waterproof covering) to prevent oxidaon of the internal or
external parts of the machine.
Remember that the oxidaon of shas or other mechanical parts
reduces its fague strength.
During the liing and transport of the winch, make sure that
it is not inclined, in relaon to the horizontal posion, at
more than a 20 angle°, as the oil in the winch may leak. If the
winch has to be transported in a slanted posion exceeding
these angles, the winch order must specify a request for
supply with “oil separately”.
20°