Siemens 1LA8 - Table 3-2 Machine Design with Type of Protection Ex Na or Ex Ec

Feature Standard
Terminal markings and direction of rotation IEC/EN 60034‑8
Noise emission IEC/EN 60034‑9
Starting characteristics, rotating electrical machines IEC/EN 60034‑12*
Vibration severity grades IEC/EN 60034‑14
Vibration limits DIN ISO 10816-3
* For machines in line operation only
See also
Quality documents (Page 153)
The following standards additionally apply for explosion-proof machines:
Table 3-2 Machine design with type of protection Ex nA or Ex ec
Feature Standard
Type of protection Ex nA or Ex ec
①
IEC/EN 60079‑0
IEC / EN 60079-15 or -7
①
Optional (depending on order)
Comparison of IEC and GOST standards
The IEC/EN standards correspond to the following GOST standards.
IEC/EN GOST
IEC/EN 60034-1 GOST R IEC 60034-1
IEC/EN 60034-5 GOST R IEC 60034-5
IEC/EN 60034-6 GOST R IEC 60034-6
IEC/EN 60034-7 GOST R IEC 60034-7
IEC/EN 60034-8 GOST R IEC 60034-8
IEC/EN 60034-9 GOST R IEC 60034-9
IEC/EN 60034-12 GOST R IEC 60034-12
IEC/EN 60034-14 GOST R IEC 60034-14
This machine has been designed and built in accordance with Directive 2014/34/EU and
Customs Union Technical Regulation "On safety of equipment intended for use in explosive
atmospheres" (TR CU 012/2011) and is intended for use in industrial plants with potentially
explosive atmospheres.
The IEC/EN standards correspond to the following GOST standards.
IEC/EN GOST
IEC/EN 60079-0 GOST R IEC 60079-0
IEC/EN 60079-2 GOST IEC 60079-2
IEC/EN 60079-7 GOST R IEC 60079-7
IEC/EN 60079-10 GOST IEC 60079-10
Description
SIMOTICS TN Series N-compact 1LA8
24 Operating Instructions 08/2017