English A5E00308246-05 English
•
•
4AI I 4WIRE HART, 6ES7134-7TD50-0AB0
Product Information Leaflet
This product information leaflet contains important information
about the 4AI I 4WIRE HART electronic submodule.
Characteristics
This submodule is used to measure currents with HART
field devices (4-wire measuring transducers); HART
Communications.
The electronic submodule is plugged into the
TM-E30S44-iS/ TM-E30C44-iS terminal submodule.
Further information
Further information about the electronic submodule is
provided in the Distributed I/O ET 200iSP
(6ES7 152-1AA00-8BA0) manual.
This manual can be requested from the Siemens
representative or office in your area or free-of-charge on the
Internet at:
http://www.siemens.com/automation/service&support
Maintenance
The electronic submodule is maintenance-free. If a repair is
necessary, the electronic submodule must be returned to the
following adress:
Siemens AG, Elektronikwerk,
Östliche Rheinbrückenstr. 50, D-76187 Karlsruhe
Repairs may only be performed by the manufacturer.
To Next Page
Loading...
