Siemens 6AV2128-3GB06-0AX0 - Page 5

Preface
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
5
Naming conventions
This document uses the following naming conventions.
Term
Applies to
Plant
• System
• Machining center
• One or more machines
Comfort HMI device,
HMI device,
Device
• MTP700 Unified Comfort
• MTP1000 Unified Comfort
• MTP1200 Unified Comfort
• MTP1500 Unified Comfort
• MTP1900 Unified Comfort
• MTP2200 Unified Comfort
WinCC
SIMATIC WinCC Unified V16 or higher
Instead of the full product name, the short product name is also used without the suffix
"Unified Comfort", for example:
"MTP700" representative for "MTP700 Unified Comfort"
Figures
This manual contains figures of the described devices. The figures can deviate from the
delivered device in detail.
Picture components are marked with black position numbers on a white background:
①, ②, ③, ...
Steps in the figures are identified with white process numbers on a black background
according to the sequence in which they have to be executed: , , , ...