Siemens 6ES7647-0BA00-1YA2 - Wall Mounting; Vertical Wall Mounting

Installing and connecting the device
3.2 Mounting the device
SIMATIC IOT2050
22 Operating Instructions, 03/2020, A5E39456816-AA
3.2.3 Wall mounting
3.2.3.1 Vertical wall mounting
The device is suitable for horizontal or vertical wall mounting.
Note
The device must be installed on the plate of an enc
losure.
Requirement
● Two mounting brackets
● Two screws
● T8 screwdriver
Procedure for mounting
1.
Lay the mounting brackets on the rear of the device.
2.
Fasten the brackets with supplied screws.
3.
Mark the bore holes, drill the required holes in the wall and fasten the device to the wall
using two screws.