•
Triggering on GOOSE signals via Continuous Function Chart
•
Creation of flexible trigger conditions through use of logic block charts (Continuous Function Chart)
•
Specifying the limits for electrical measurands
•
Monitoring power network quality (Power Quality Monitoring) according to EN 50160
•
Measuring flicker according to IEC 61000-4-15
•
Additional functions for simple tests and for commissioning
Introduction
1.3 Properties of the Fault Recorder
24 SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
To Next Page
