A-Series 530 lb-in Servo Controller
A-Series 530 lb-in Servo Controller
Safety
Hazard-Free Use
This device left the factory in proper condition to be safely installed and operated in a
hazard-free manner. The notes and warnings in this document must be observed by
the user to ensure hazard-free operation of this device.
All necessary precautions must be taken to prevent damage due to rough handling,
impact, or improper storage. Do not use abrasive compounds to clean the device, or
scrape its surfaces with any objects.
Configuration and setup procedures for this device are described in this manual.
Proper configuration and setup are required for the safe operation of this device.
The control system in which this device is installed must have proper safeguards to
prevent injury to personnel, or damage to equipment, should a failure of system
components occur.
The device generates large mechanical force during normal operation.
The actuator must only be installed, commissioned, operated and repaired by
qualified personnel.
Installation, commissioning, operation and maintenance must be performed under
strict observation of all applicable codes, standards and safety regulations.
As per this document, a qualified person is one who is trained in:
1. The operation and maintenance of electric equipment and systems in accordance
with established safety practices.
2. Procedures to energize, de-energize, ground, tag and lock electrical circuits and
equipment in accordance with established safety practices.
3. The proper use and care of personal protective equipment (PPE) in accordance
with established safety practices.
4. First aid.
To Next Page
Loading...
