120V On/Off with 1 set AUX Switches
MODEL – A226.530
Fig. 2: Model A226.530 Wiring
Fig. 3: Model A226.530 Servo Controller.
A-Series 530 lb-in 120V Modulating Actuator with
Servo Controller
Power connection that energizes the Servo controller and powers the actuator under
control. The voltage supplied should be based on the actuator nameplate voltage and
the voltage listed on the Servo label.
The Servo controller has an onboard protective fuse that is in line with the input power
connection. This protective fuse is rated for 5A.
To control the actuator remotely from a process controller in a modulating application,
the user must apply the proper supply voltage and the configured control signal to the
To Next Page
Loading...
