right page (15) of A60, short, en, A31008-H5870-A1-2-7619 (14.07.2004, 20:37)
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\04FL00611 A60_Neuausgabe\Final\A60_SUG\en\A60K_Startup.fm
15Security
VAR Language: English; VAR issue date: 08-August-2003
§Menu§
¢
m
¢
Security
¢
Codes
¢
Select a function.
Change PIN2
(Display only if PIN 2 is available).
Proceed as with Change PIN.
Change phonecode
You define the phone code (4 to
8 digits) when calling up a phone-
code protected function for the first
time. It is then valid for all phone-
code protected functions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. In such an instance contact
Siemens Service (p. 46).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Preventing accidental
activation
Even if PIN entry is deactivated
(p. 14) confirmation is required to
switch on phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
B
Hold down.
§OK§ Press. The phone switches
on.
§Cancel§ Press or take no action.
The phone does not
switch on.
Additional notes
Screensaver ......................................p. 34
Keylock................................................p. 5
Further security settings ....................p. 37
Please confirm switch on
OK Cancel