Siemens A60 - Making and Ending Phone Calls; Dialing and Ending Calls; Volume Adjustment and Redial

©
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\04FL00611 A60_Neuausgabe\Final\A60_SUG\en\A60K_Phone.fm
left page (16) of A60, short, en, A31008-H5870-A1-2-7619 (14.07.2004, 20:37)
Making a phone call16
VAR Language: English; VAR issue date: 08-August-2003
Making a phone call
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Dial number (always with
area code, if necessary
with international dialling
code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
A
Press the Call key to dial.
End call
B
Press the End key briefly.
The call is ended. Press
this key even if the person
on the other end of the
line has hung up first.
Set volume
E
Use the control key (top)
to start adjusting the vol-
ume during conversation.
G
Set volume and confirm
with §OK§.
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial previous numbers
For redialling previously dialled
numbers:
A
Press the Call key once.
G
Pick out the required
phone number from the
list, then press ...
A Press ....
If number busy
Autom. Redial previous numbers
§Auto dial§ The phone number is
automatically dialled ten
times at increasing time
intervals.
Or
Call back
b
§Call back§ Your phone rings when
the busy number is free.
Reminder
§Prompt§ A beep reminds you to
redial the displayed
phone number after
15 minutes.
International dialling codes
0
Hold down until a "+" is dis-
played.
§+List§ Press and select country.