Siemens A60 - Setup: Connectivity and Security; Connectivity Settings; Security Settings

©
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\04FL00611 A60_Neuausgabe\Final\A60_SUG\en\A60K_Setup.fm
left page (36) of A60, short, en, A31008-H5870-A1-2-7619 (14.07.2004, 20:37)
Setup36
VAR Language: English; VAR issue date: 08-August-2003
Divert
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
§Menu§
¢
m
¢
Divert
¢
Select a function.
Set up call divert (example):
All calls
b
All calls are diverted.
n Symbol in the top line of
the display in standby
mode.
Unanswered
b
G
Select Unanswered. (Cov-
ers the conditions Not
reachable, No reply, Busy)
§Select§ Press and Set select. Enter
the phone number , to
which the call should be
diverted.
§OK§ Press. After a short pause,
the setting is confirmed
by the network.
Other divert options:
Not reachable, No reply, Busy
Status check
After a short pause the current infor-
mation is shown.
p Condition set.
o Not set.
s
Display if status is
unknown (e.g. with a new
SIM card).
Clear all
b
All set diversions are cleared.
Clock
§Menu§
¢
m
¢
Clock
¢
Select function.
Time/Date
§Change§ Enter the date first, then
the time.
Time format
Select 24h or 12h.
Time zones
Specify your current time zone.
Date format
DD.MM.YYYY or MM/DD/YYYY or
YYYY-MM-DD
Show clock
Switch on/off time display.
Buddhist year
Change to Buddhist date (not avail-
able in all phones).
Additional notes
If the battery is removed for longer than
30 seconds, the clock must be reset.