Purpose
The purpose of the Arc Fault Circuit Interrupter (AFCI) Diagnostic Breaker is to help identify and diagnose
why AFCI breakers may be tripping. AFCI breakers monitor electrical signals on the wiring for conditions that
are present during an arc-fault event. Commonly, this is due to loose, frayed, or damaged wiring. Some-
times, this can be attributed to inadequate filtering of RF noise from devices in the home. The diagnostic
tool helps pinpoint the root cause by taking measurements of these signals.
Setup
Connecting your Mobile Device to the Diagnostic Breaker
. Replace AFCI breaker that is known to trip
with Diagnostic Breaker
. Turn Diagnostic Breaker ON.
. To begin pairing, press and hold PTT
button on breaker until the PWR LED
begins to blink. This takes approximately
seconds.
. When breaker is available, it will populate
as shown in the image. If the screen does
not populate, click the refresh icon at
the top of the screen.
Android
• Tap the breaker to connect
• Device will auto connect
iPhone
• Tap the breaker to connect
• When asked for a PIN to pair, enter
.
AFCI Diagnostic Circuit Breaker Quick Start Guide
To Next Page
Loading...
