Siemens ARCADIS Varic - General Information and Safety; Notes and Safety Symbols; Validity of Instructions

Siemens AG SPR2-310.842.01.07.02 ARCADIS Varic / Orbic
12.06 CS SD 24
Prerequisites 5
Page 5 of 34
Medical Solutions
Safety Information and Safety Measures 1.1
NOTE
When performing service work and tests, please observe:
- the product-specific information in the document Replacement
of Parts, SPR2-310.841.01..
- the safety information in TD00-000.860.01.. in the Register in the
ARCADIS binder, as well as
- the safety information contained in the ARTD, Part 2.
WARNING
Dangerous X-radiation during checks and adjustment work steps.
Risk of death or serious physical injury.
¹ For checks and adjustments that must be performed with
radiation switched on, the prescribed radiation safety
measures must be observed; if necessary, wear radiation
protective clothing (see also ARTD-002.731.02.. and
ARTD-002.731.38.. General Guidelines for Technical Ser-
vice). These checks and adjustments are explicitly
labeled on the following pages with the radiation warning
symbol x .
Symbols
X This symbol means “X-ray”, checks and adjustments that must be performed with
radiation ON.