Siemens AVS74 - Page 59

Evaluate plant and set
6
Evaluate and operate Info pages
59
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Reset interactive errors
l An interactive error exists on the plant.
l The Info pages (
) are selected. The title of the first error page is preselected.
Proceed as follows to reset an interactive error:
1. Turn the control knob to preselect "Reset".
2. Press the control knob.
The text changes to "Confirm" and is displayed inverted.
3. Press the control knob to initiate reset on the controller.
During the reset, the text changes to "Activated" and is preselected.
4. The page is automatically closed if the error is reset.
The device address ("Segment.Device") is not displayed on a directly connected
controller.
Prerequisites