70
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Expert view: OEM
1. You must turn the control to password entry if you have selected the OEM
level.
2. Press the control knob.
The first digit position is selected.
3. Turn the control knob to enter the first digit of the OEM password.
4. Press the control knob to confirm entry.
The second digit is selected.
5. Do the same for the 5 digits of the OEM password.
6. You receive feedback on successful login that you confirm with "Continue".
a The user symbol ( ) with the corresponding level is displayed on the status
bar.
To Next Page
Loading...
