005109_b_en-0
1
Fire & Security Products
Siemens Building Technologies Group
07.2004
About this document
Purpose of the document
This document describes the commissioning of the hardware modules of the control units
CS1140/45 with extinguishing section. The consistent observance of the instructions ensures a
trouble-free and safe application.
Scope
This document contains information valid for the software variant EP7F.
Target group
Group of persons Activity Qualification
Commissioning personnel The configuration of the products, devices or systems
for specific customers at the place of installation.
They check serviceability and officially clear the product,
device or system for use by the operator / customer.
They are also responsible for trouble-shooting.
They have had the training appropriate to their func−tion
and to the commissioning of the products, de-vices or
systems and have attended the technical training cour-
ses for commissioning personnel.
Reference documents
Information in Document
1260 Description of hardware plug−in modules (CS1140 ’Modular’)
004665 Operating instructions AlgoPilot B3Q4..
004598 Operating instructions AlgoPilot B3Q6..
005590 Operating instructions ’Extinguishing’ with AlgoPilot B3Q4..
005113 Operating instructions ’Extinguishing’ with AlgoPilot B3Q6..
005377 Compact control unit CI1145
006516 Inscription strip templates for indication and operation equipment
Operational and safety regulations
i
Before persons begin work on the system, they must have read and understood the related
documents, in particular Chapter 1 ’Safety regulations’.
To Next Page
Loading...
Need help?
General
