Siemens CP 1243-7 LTE - Page 141

Approvals
CP 1243-7 LTE
Operating Instructions, 04/2017, C79000-G8976-C381-03
141
R&TTE
Valid only for theCP 1243-7 LTE-EU (6GK7 243-7KX30-0XE0)
The CP meets the requirements of the EC directive 1999/5/EC "Radio equipment and
telecommunications terminal equipment" according to the requirements of article 3 (1) a,
3 (1) b and 3 (2).
Article 3 (1) a - Health and Safety
Harmonized standards:
● EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Information technology equipment - Safety - Part 1: General requirements
● EN 62311:2008
Assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0 Hz ... 300 GHz)
Art. 3 (1) b - EMC
Harmonized standards:
● ETSI EN 301 489-1 V1.9.2
Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic
compatibility for radio equipment and services - Part 1 : Common technical requirements
● ETSI EN 301 489-3 V1.6.1
Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic
compatibility (EMC) for radio equipment and services - Part 3 : Specific conditions for
wireless devices with a low range (SRD) for use on frequencies between 9 kHz and 246
GHz
● ETSI EN 301 489-7 V1.3.1
Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic
compatibility for radio equipment and services - Part 7 : Specific conditions for mobile and
portable radio and ancillary equipment of digital cellular radio telecommunications
systems (GSM and DCS)
● ETSI EN 301 489-24 V1.5.1
Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic
compatibility for radio equipment and services - Part 24 : Specific conditions for mobile
and portable IMT-2000 CDMA Direct Spread (UTRA) radio and ancillary equipment
● EN 61000-6-1:2007
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
● EN 61000-6-2:2005+AC:2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments