Siemens CP 1243-7 LTE - Page 142

Approvals
CP 1243-7 LTE
142 Operating Instructions, 04/2017, C79000-G8976-C381-03
● EN 61000-6-3:2007+A1:2011+AC:2012
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard
for residential, commercial and light-industrial environments
● EN 61000-6-4:2007+A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments
● EN 55022:2010+AC:2011 Class A / B
Information technology equipment - Radio disturbance characteristics - Limits and
methods of measurement
● EN 55024:2010
Information technology equipment - Immunity characteristics -Limits and characteristics -
Limits and methods of measurement
Art. 3 (2) Measures of efficient use of the frequency spectrum
Harmonized standards:
● ETSI EN 300 440-2 V1.4.1
Electromagnetic compatibility and radio spectrum matters (ERM) - short range devices -
radio equipment to be used in the 1 GHz to 40 GHz frequency range. Part 2: Harmonized
standard covering the essential requirements of article 3.2 of the R&TTE directive.
● ETSI EN 301 511 V9.0.2
Global system for mobile communication (GSM). Harmonized standard for mobile phones
in the GSM 900 and GSM 1800 bands covering essential requirements of article 3.2 of
the R&TTE directive.
● ETSI EN 301 908-1 V6.2.1
IMT cellular networks - Harmonized standard covering the essential requirements of
article 3.2 of the R&TTE directive. Part 1: Introduction and common requirements
● ETSI EN 301 908-2 V6.2.1
IMT cellular networks. Harmonized standard covering the essential requirements of article
3.2 of the R&TTE directive. Part 2: CDMA Direct Spread (UTRA FDD) User Equipment
(UE)
● ETSI EN 301 908-13 V6.2.1
IMT cellular networks. Harmonized standard covering the essential requirements of article
3.2 of the R&TTE directive. Part 13: Evolved Universal Terrestrial Radio Access
(E-UTRA) User Equipment (UE)
Maximum antenna gain
Users and installers must be provided with antenna installation instructions and transmitter
operating conditions that must be followed to avoid exceeding the permitted RF exposure.
Refer to the technical specifications of the antenna, refer to the appendix Antenna
(Page 147).