Siemens CP 243-1 - Page 135

Sample program
CP 243-1
Operating Instructions, 03/2012, C79000-G8976-C244-02
135
//------------------------------------------------------------------
--
// CP 243-1 Module Configuration block. Generated by the Internet
// Wizard
//------------------------------------------------------------------
--
VB0'CP243'// Module ID for CP 243-1 module at position 0
VW516#006C// Length of CDB
VW716#0014// Length of NPB
VB916#81// Configuration Data Version
VB10 16#00// Project Configuration Version
VW11 16#0000
VW13 16#0004// Auto Detect Communications,User Configured
// IP Address, CRC protection enabled.
VD15 16#C1012807 // IP Address for module (193.1.40.7)
VD19 16#FFFFFF00 // Subnet mask address for module (255.255.255.0)
VD23 16#C1012801 // Gateway Address (193.1.40.1)
VW27 30 // Keep Alive Interval in seconds
//------------------------------------------ Connection 0
VB29 16#83// Client Connection,Keep Alive Enabled.
VD30 16#C1012812 // Address of Server for this connection
//(193.1.40.18)
VW34 16#1000// Local TSAP for this connection (10.00).
VW36 16#1000// Remote TSAP for this connection (10.00).
//------------------------------------------ Connection 1
VB38 16#00// Connection not defined.
VD39 16#00000000
VW43 16#0000
VW45 16#0000
//------------------------------------------ Connection 2
VB47 16#00// Connection not defined.
VD48 16#00000000
VW52 16#0000
VW54 16#0000
//------------------------------------------ Connection 3
VB56 16#00// Connection not defined.
VD57 16#00000000
VW61 16#0000
VW63 16#0000
//------------------------------------------ Connection 4
VB65 16#00// Connection not defined.
VD66 16#00000000
VW70 16#0000
VW72 16#0000
//------------------------------------------ Connection 5
VB74 16#00// Connection not defined.
VD75 16#00000000
VW79 16#0000
VW81 16#0000
//------------------------------------------ Connection 6
VB83 16#00// Connection not defined.
VD84 16#00000000
VW88 16#0000
VW90 16#0000
//------------------------------------------ Connection 7