Siemens CU240B-2 - Page 34

Installing
3.4 Connecting up the fieldbus
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
34 Getting Started, 04/2014, A5E32885834B AB
Description files for fieldbuses
The description files contain the information required to configure and operate the inverter on
a fieldbus under a higher-level control.
Description file
Download
Alternative to download
GSD for PROFIBUS
Internet:
(http://support.automation.sieme
ns.com/WW/view/en/23450835)
GSD and GSDML are saved in the
inverter. The inverter writes its GSD or
GSDML to the memory card once you
insert this card in the inverter and set
p0804 to 12. You can then transfer the
file to your programming device or PC
using the memory card.
GSDML for PROFINET
Internet:
(http://support.automation.sieme
ns.com/WW/view/en/26641490)
EDS for CANopen
Internet:
(http://support.automation.sieme
ns.com/WW/view/en/48351511)
---
EDS for Ethernet/IP
--- Further information can be found in the
operating instructions