Need help?Do you have a question about the Siemens G120P and is the answer not in the manual?
General| Power Range | 0.37 kW to 630 kW |
|---|---|
| Control Type | Vector control, V/f control |
| Protection Class | IP20 |
| Integrated Safety | STO (Safe Torque Off) |
| Frequency Range | 0 Hz to 650 Hz |
| Communication Interfaces | PROFINET, PROFIBUS, USS, Modbus RTU |
| Cooling Method | Air cooling |
| Output Voltage | 3-phase, 0 V to input voltage |
Explains symbols and signal words used for safety instructions in the document.
Provides general warnings, precautionary measures, and hazard instructions for working with the device.
States the manufacturer's limitations of liability regarding device usage and modifications.
Details control unit structure, terminals, motor cable requirements, and EMC specifications.
Outlines wiring sequences for IP55 and IP20 protection degrees, including cable preparation.
Provides guidelines for electromagnetic compatibility, including cabling, ferrite rings, and shielding.
Explains the functions and screen symbols of the IOP and BOP-2 operator panels for drive control.
Covers preparing for setup, basic factory settings, and wizard-based commissioning procedures.
Details additional settings, parameters, data backup, and communication protocol setup.
Describes a standard configuration for general-purpose drive applications using macro 101.
Details configuration for regulating pump pressure using a PID controller with macro 103.
Examples for supply fans, cooling tower fans with hibernation, sensors, and ESM.
Configuration for stairwell pressurization using Essential Service Mode (ESM) with macro 104.
Examples for fixed setpoints, CO2 sensors with PID, and temperature-dependent pressure setpoints.
Provides information on the expected service life of the drive's fan and replacement procedures.
Procedures for recovering from crashes and understanding drive status LEDs (RDY/BF).
Lists and describes common alarms and faults, their causes, and solutions.
Details tests and procedures for diagnosing hardware issues on the drive, including power and function tests.
Provides a template for recording drive commissioning parameters and settings.
Lists related manuals and documentation for the SINAMICS G120P system.
To Next Page
