To Next PageTo Next Page
Need help?Do you have a question about the Siemens SINAMICS G120P CU230P-2 and is the answer not in the manual?
General| Control Unit Type | CU230P-2 |
|---|---|
| Application | Pumps, Fans, Compressors |
| Digital Inputs | 6 |
| Analog Inputs | 2 |
| Digital Outputs | 3 |
| Analog Outputs | 2 |
| Safety Integrated | STO (Safe Torque Off) |
| Degree of Protection | IP20 |
| Input Voltage | 24 V DC |
| Supply Voltage | 24 V DC |
| Communication Interfaces | PROFIBUS, USS, Modbus RTU |
| Operating Temperature | -10 to +50 °C |
| Storage Temperature | -40 to +70 °C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 2000 m without derating |
Provides essential safety warnings and instructions for safe operation and to prevent hazards.
Outlines measures to protect plants, systems, machines, and networks against cyber threats.
Instructions for plugging the Control Unit onto the Power Module and special features for different modules.
Details the interfaces at the front and lower side of the Control Unit, including slots, terminals, and LEDs.
Explains terminal strips with wiring examples and electrical connections for inputs and outputs.
Describes the default interface configurations for PROFIBUS, PROFINET, and USS interfaces.
Details various default settings for digital and analog inputs/outputs and fieldbus interfaces.
Lists operator panels (IOP, BOP-2) and PC tools (STARTER, Startdrive) for inverter commissioning.
Guides through using the BOP-2 panel for quick commissioning, motor data identification, and optimization.
Covers connecting the inverter to fieldbuses like PROFINET, PROFIBUS, Modbus RTU, and BACnet MS/TP.
Lists and explains commonly used parameters for configuring the inverter's functions.
Lists available manuals for CU230P-2, including operating instructions and function manuals.
Provides contact information for technical support and links to product support resources.
