Safety
1
Disclaimer of liability
7
Siemens AG
CM2G5111en
2014-05-16
CAUTION
It is only permissible to use the device for the purposes specified by the
manufacturer.
Unauthorized use or modifications can result in fires, electric shocks and injuries.
● The device may only be used for the intended purpose.
● Do not carry out any modifications to the device.
● Only use spare parts and accessories which are distributed or recommended
by the manufacturer of the device.
● Do not use the device as an "emergency stop device" (see EN 60204,
9.2.5.4).
NOTICE
The required ambient conditions must be observed.
Unsuitable ambient conditions can affect the functions of the device.
● Only install the variable speed drive in areas which are free from jolts,
vibrations, electromagnetic fields, and corrosive gases.
● Maintain the ambient conditions which are specified in the technical data,
such as temperature, pressure, humidity, etc.
Disclaimer of liability
NOTICE
In the event of operation in a fire or in emergency mode, the equipment and
device protection functions are disabled.
As a result, damage may occur to the device and the equipment.
● Only activate fire or emergency mode if the continuous operation of the drive
(fan) is absolutely necessary, e.g., in order to ensure that smoke and heat are
extracted in the event of the building being evacuated.
1.3
To Next Page
Loading...
Need help?
General
